Device Details
Overview
| Name | Version: | Sends Follower 1.0 |
| Author: | Fadercraft |
| Device Type: | MIDI Effect |
| Description: | Turn any send into a performance modulator. Video presentation → https://www.youtube.com/watch?v=1xYVGh-SX_k Sends Follower reads a send level and turns it into a control signal you can map to anything in your set. Move the send — a knob you already have on your controller — and it drives filter cutoff, drive, reverb size, a dozen parameters at once. You play the send; the device follows your hand. Deterministic, musical, repeatable. Two devices in the pack: Sends Follower – Return — drop it on a return track. It watches every track's send to that return and sums them into one value (Peak = the loudest send, or Total = all sends combined). The harder the set pushes into that return, the more the modulation opens. One knob per track, one shared destination. Sends Follower – Track — drop it on a regular track. It follows that track's own send, so each track gets its own independent performance modulator off its send knob. Map anything, set the range: An embedded multi-map panel gives you mapping slots. Click Map, then click any parameter for any device in your set, and set Min/Max per slot as percentages; invert values if needed. The follow value scales into that window — so one send move can open a filter halfway, push drive to the top, and nudge reverb a touch, all at once, all under your fingers. Details: Native live.remote~ modulation — clean, low-CPU Self-detects which return it sits on Peak / Total mode, saved with the device and your presets Built-in update notifier Works in Live 11+ / Max 8+ |
Details
| Live Version Used: | 12.0.5 |
| Max Version Used: | 8.6.2 |
| Date Added: | Jul 08 2026 12:00:53 |
| Date Last Updated: | Jul 08 2026 12:04:25 |
| Downloads: | 0 |
| Website: | https://fadercraft.com/sends-follower |
| ⓘ License: | Commercial |
Average Rating
Log in to rate this device |
-n/a- |
Login to comment on this device.
Browse the full library